ASTM D3776/D3776M-2009a 纺织品单位面积(重量)质量的标准试验方法

上一篇: ASTM D7007-2009 水或土料覆盖的土工膜上漏洞定位的电方法的标准实施规程
下一篇: ASTM D3786/D3786M-2009 织物破裂强度的标准试验方法.薄膜破裂强度试验器法

Product Code:SAE J2071
Title:Aerodynamic Testing of Road Vehicles--Open Throat Wind Tunnel Adjustment
Issuing Committee:Road Vehicle Aerodynamics Forum Committee
Scope: As a simulation of road driving, wind tunnel testing of full-size vehicles produces certain errors in the aerodynamic forces, aerodynamic moments, and surface pressures. The magnitude of these errors, in general, depends on the following: a.) Flow quality, b.) Determination of the reference dynamic pressure, c.) Wind tunnel floor boundary layer, d.) Test section geometry and position of the car within that geometry, e.) Shape of the vehicle, f.) Blockage ratio: The ratio of the cross-sectional area of the vehicle to the cross-sectional area of the wind tunnel nozzle, g.) Wheel rotation, and h.) Internal flow in the model. The SAE Standards Committee, Open Throat Wind Tunnel Adjustments, had as a goal to document the knowledge of the influence of model interference on wind tunnel test results for automotive open jet wind tunnels. This document contains the following information related to this subject: a.) Design data of open throat wind tunnels, b.) A summary of published and unpublished test data, c.) Documentation and theoretical explanation of various blockage correction procedures for automotive tests, d.) Critical evaluation of blockage correction procedures, especially in relation to other influences, such as test section geometry, position of the car, floor boundary layer, etc., and e.) Recommendation of a calibration procedure to determine the effect of blockage and other influences in each individual wind tunnel.
Rationale: As a simulation of road driving, wind tunnel testing of full-size vehicles produces certain errors in the aerodynamic forces, aerodynamic moments, and surface pressures. The magnitude of these errors, in general, depends on the following: a.) Flow quality, b.) Determination of the reference dynamic pressure, c.) Wind tunnel floor boundary layer, d.) Test section geometry and position of the car within that geometry, e.) Shape of the vehicle, f.) Blockage ratio: The ratio of the cross-sectional area of the vehicle to the cross-sectional area of the wind tunnel nozzle, g.) Wheel rotation, and h.) Internal flow in the model. The SAE Standards Committee, Open Throat Wind Tunnel Adjustments, had as a goal to document the knowledge of the influence of model interference on wind tunnel test results for automotive open jet wind tunnels. This document contains the following information related to this subject: a.) Design data of open throat wind tunnels, b.) A summary of published and unpublished test data, c.) Documentation and theoretical explanation of various blockage correction procedures for automotive tests, d.) Critical evaluation of blockage correction procedures, especially in relation to other influences, such as test section geometry, position of the car, floor boundary layer, etc., and e.) Recommendation of a calibration procedure to determine the effect of blockage and other influences in each individual wind tunnel.【英文标准名称】:Earth-movingmachinery--Definitionsofdimensionsandcodes--Part1:Basemachine
【原文标准名称】:运土机械.尺寸和符号定义.第1部分:机器底盘
【标准号】:JISA8411-1-2006
【标准状态】:现行
【国别】:日本
【发布日期】:2006-10-20
【实施或试行日期】:
【发布单位】:日本工业标准调查会(JP-JISC)
【起草单位】:TechnicalCommitteeonIndustrialMachinery
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:この規格は,土工機械の本体の寸法に関する用語及びコードについて規定する。同時に,この規格は,用語及び仕様項目の規格において類似寸法を定義するための参照方式及び識別するためのコード方式についても規定する。
【中国标准分类号】:P97
【国际标准分类号】:53_100
【页数】:12P;A4
【正文语种】:日语